Vulcanization Of Inflatable Rubber Fender Integral Molding Process
Yokohama Fender
Pneumatic rubber fender features:
1, large energy absorption, small reaction force, so as to ensure
that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not
affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the
force after the force is exerted. After the fender is squeezed,
more than 95% of the product will be released immediately after the
force.
4, good economic performance, compared with the fender, Beierte
ship fenders economic performance is good, cost-effective, reliable
quality. Beierte Marine Fenders has gone through layers of
inspection to ensure its quality from raw material procurement,
product ordering, product production and product inspection to
delivery.
Inflatable rubber fender and pneumatic fender are commonly used
dimensions and properties
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Instructions for operation and maintenance
1. The maximum deformation of the inflatable rubber fender in the
use process is 60% (except for special ship type or special
operation), and the use pressure is 50KPa-80KPa (the use pressure
can be determined according to the user's ship type, tonnage size
and near environment).
2. During the use of Marine pneumatic fender, attention should be
paid to avoiding the puncture and scratch of sharp objects; And
timely maintenance and maintenance, in general 5- 6 months for a
pressure test.
3, often check the pneumatic rubber fender body for puncture,
scratch. The surface objects in contact with the fender shall not
have sharp protruding hard objects to prevent puncturing the
fender. When the fender is in use, the cable or chain or wire rope
hanging the fender shall not be knotted.
4. When the fender is not used for a long time, it should be
cleaned and dried, filled with appropriate amount of gas, and
placed in a dry, cool and ventilated place.
5. The fender should be kept away from heat, and should not contact
with acid, alkali, grease and organic solvent.
6, do not pile up when not in use, do not pile up heavy objects on
the fender.
Inflatable rubber fender structure diagram
Pressure test for inflatable rubber fender
Display of inflatable rubber fender products
Service tenet:
Integrity management, quality first; Create a world famous brand,
do a hundred years of enterprise;
Rigorous and pragmatic, considerate; Serve every user attentively.
After-sales service:
1. All products of the company are produced in strict accordance
with ISO17357:2014 standards.
2, the company's products in normal use, the life of 8-10 years.
3, the company will carry out strict inspection on each product
before leaving the factory, to ensure that all products without any
quality problems before leaving the factory, so that every user can
rest assured with.
4, the company's product quality warranty period of 2 years,
quality problems occurred during the warranty period free repair or
replacement.
5. Responsible for guiding repair and maintenance process, and
long-term supply of repair materials and tools.
6. Instruct or participate in the implementation and application of
products to various projects.
7. Provide pre-sale, in-sale and after-sale services
